EN AW 3103A | Al Mn1(A)

Aluminum tk accelis

On this page you can find the chemical and mechanical specifications of the alloy EN AW 3103A | Al Mn1(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 3103A - send request!

Chemical composition [% max. or range]

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.5	0.7	0.1	0.7–1.4	0.3	0.1	—	0.2	0.1	—	—

EN AW 3103A | Al Mn1(A): Heat-treated condition 0/H111

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	27	35	90 - 130	17		0 t	0 t
0.5 - 1.5	27	35	90 - 130	19		0 t	0 t
1.5 - 3	27	35	90 - 130	21		0 t	0 t
3 - 6	27	35	90 - 130	24		1.0 t	1.0 t
6 - 12.5	27	35	90 - 130	28			1.5 t
12.5 - 50	27	35	90 - 130		25

EN AW 3103A | Al Mn1(A): Heat-treated condition H22

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	36	75	115 - 155	6		1.0 t	0 t
0.5 - 1.5	36	75	115 - 155	7		1.0 t	0.5 t
1.5 - 3	36	75	115 - 155	8		1.0 t	1.0 t
3 - 6	36	75	115 - 155	9			1.0 t
6 - 12.5	36	75	115 - 155	11			2.0 t

EN AW 3103A | Al Mn1(A): Heat-treated condition H24

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	44	110	140 - 180	4		1.5 t	0.5 t
0.5 - 1.5	44	110	140 - 180	4		1.5 t	1.0 t
1.5 - 3	44	110	140 - 180	5		1.5 t	1.0 t
3 - 6	44	110	140 - 180	6			2.0 t
6 - 12.5	44	110	140 - 180	8			2.5 t

Your product of choice: EN AW 3103A | Al Mn1(A)